anyone know LS8 and LX90 are they same price?

C.L.Chan

回復 38# tsoyann

請問這張月球相片(38#)是用LS8內置相機拍的嗎?

C.L.Chan

回復 40# tsoyann

若你用 Charge Battery，每舊電只有 1.2V, 1.2V x8 = 9.6V,與12V相差有一段距離,可能因此有 "Power Low" 出現。

C.L.Chan

回復 40# tsoyann

聽你講8件中號電只可用3小時，Controller 經常顯示"Power Low" 與 Re start 是表示電壓開始下跌。要換新電了。

tsoyann

no ha i use my phone took that pic thz for the reply

tsoyann

i am not use CCD take pic yet cos my mini SD card got probz as you saw last time when i put it in n the telescope dosnt work

tsoyann

n more jz wana say it aint 'power low' it says 'power lost' all the time even when i put the new battery :S

C.L.Chan

回復 39# tsoyann

你的 Controller 只是用來控制望遠鏡的指向，不可以放大影像。
若要放大影像，你需要買一些更短焦距的目鏡，如12.5mm或6mm。
現時的倍率為 2000mm/26mm=77倍
改用12.5mm目鏡可得 2000mm/12.5mm=160倍
改用6mm目鏡可得 2000mm/6mm=333倍。

tsoyann

吓點解咁得意LS8明知用12v點解只係比佢入9.6v電

C.L.Chan

回復 46# tsoyann

"Power Lost" means poor contact in your batteries or the battery cable connected.
During working, the circuit is open suddenly, then the controller will report "Power Lost".
Check any abnormal in battery box , connecting plug and cables.
You can also ask the supplier to solve this problem, it is because your telescope is
under guaranty period.

C.L.Chan

回復 48# tsoyann

若用不能 re-charge的電蕊，1.5V x 8 = 12 V，用完即棄的那種。
若用 re-charge的電蕊，1.2V x 8 = 9.6 V